Where We Are

YES, the CopperWatcher™ detects the loss of power and continues to monitor your equipment and will not cause a false alarm.

YES, CopperWatcher™ will interface with all residential and commercial burglar alarm systems. Contact your alarm company and ask if they sell the CopperWatcher™.

YES, that is one of the many benefits of connecting to your existing alarm system.

YES, your alarm system siren will act as the deterrent if a theft is detected.

CopperWatcher™ does not change the way routine maintenance, seasonal service or annual cleaning is performed.

NO, the CopperWatcher™ will not void the factory warranty.

It can, depending on your existing alarm system capabilities.

They simply install the CopperWatcher control enclosure to the main safety electrical disconnect located next to the electric meter. Run a pair of 16 gauge inline fused (smallest amperage as possible) wire from 2 legs of the supplied voltage to the line voltage terminals of the CopperWatcher. Run a pair of 16 gauge inline fused (smallest amperage as possible) wire from 2 legs of the applied voltage to the load voltage terminals of the CopperWatcher. Install a jumper between terminals P1 and P2. The alarm company will connect to terminals A1 and A2.